What kind of environment is worm gear reducer suitable for?

What kind of environment is worm gear reducer suitable for? The maintenance and basic knowledge of the turbine and my sweat reducer are often ignored by many users. In fact, some details in the work are ignored, so do you know the most important details? What kind of working environment is worm gear reducer suitable for? If you don't pay attention to this point, it will affect the important cause and service life of the reducer. The working environment temperature of worm reducer is - 40-45 ℃, and the environment temperature is lower than - 30 ℃ or higher than 60-30 ℃, the oil seal of special material must be replaced; if it is lower than 0 ℃, the lubricating oil shall be preheated to above 0 ℃ before starting.
When the worm gear reducer is used for the first time, the lubricating oil shall be changed after 150-400 hours of operation, and the later oil change cycle of the worm gear reducer shall be less than or equal to 4000 hours. 2 check the quantity and quality of oil regularly, reserve enough lubricating oil, and replace the oil mixed with impurities or deteriorated in time. The operation coefficient of worm gear reducer depends on the actual operation environment. When choosing the appropriate service coefficient, the load property at the output end, the daily operation time and the starting frequency must be considered.